• Forust

Forustwood – No Grain

Binder Jetting

Material info

About Forustwood – No Grain

Parts made by the Forust binderjet wood 3d printing process are a composite of wood and bio-epoxy resin. It has a grainy rough finish that is sanded and made smooth for staining, varnishing and lacquering.

Color & Finishes



  • Binder Jetting

Design Guidelines

Bounding Box

Bounding Box Max
320 x 200 x 150 mm

Bounding Box Min
50 x 50 x 6 mm or X + Y + Z >= 150 mm

The bounding box is a 3D imaginary outline of a box that encloses the smallest area occupied by your model. Your model must be within the minimum and maximum bounding box sizes. If the size of the model is close to the maximum bounding box, then the printing orientation will be restricted.


Supported Wall Thickness Min
5 mm
Unsupported Wall Thickness Min
5 mm
A supported wall is connected at least on two sides of the wall, while an unsupported wall is connected only on one side of the wall. Walls that do not meet the minimum requirements may not survive printing and cleaning processes. Additionally, models may still be rejected based on the wall geometry of the model. Please consider the size of your model and reinforce the walls or add support structures as needed as minimum guidelines will not always be adequate for large models.


Details Min Embossed
12 mm
Details Min Engraved
20 mm
For text, the ratio between width and depth, should be 1:1 and sans-serif fonts are preferred for line weight consistency.


5 mm
Clearance is the space between two individual parts in a model. If the space among the individual parts do not meet the minimum clearance, then parts can fuse together or can be difficult to clean. This is important for movable pieces like hinges, gears, etc.

Interlocking & Enclosed Parts




Accuracy ± 1.0 mm
For example: a product with dimensions of 50x50x100 mm can be 0.15 mm + 0.0015*100 mm = 0.3 mm bigger or smaller in any direction.

Other Materials

Forustwood – With Grain
Application: Home goods, architecture, furniture, luxury interiors

© 2008 – 2020 Shapeways, Inc.